FRENES

Kia Sorento PCD

2002–2009
VERIFIED
⌀67.1
PCD5x114.3 or 5x139.7
Centre bore95.1 or 67.1 mm
Offset (ET)ET41 to ET47
Fixing type-
Tightening torque100 Nm
Original tyres225/75R16, 235/65R17
⚠ This model comes with 5x114.3 or 5x139.7 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 67.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Kia Sorento

A Kia Sorento (2002–2009) uses a 5x114.3 or 5x139.7 PCD and a centre bore of 95.1 or 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 or 5x139.7 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET41 to ET47. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread -, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/75R16, 235/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x139.7 95.1 mm — ET45 225/75R16
Version 2 5x114.3 67.1 mm — ET41 —
Version 3 5x114.3 67.1 mm — ET47 235/65R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Kia Sorento without rings. Offset, width, diameter and caliper clearance still need checking.

Kia EV3 from 2024 Kia EV9 from 2023 Kia EV6 from 2021 Kia Sportage V from 2021 Kia e-Soul 2019–2024 Kia Niro EV from 2019 Kia ProCeed from 2019 Kia XCeed from 2019 Kia Ceed III from 2018 Kia Stinger 2017–2024 Kia Niro 2016–2022 Kia Sportage IV 2016–2021 Kia Ceed GT from 2013 Kia Rondo 2013–2018 Kia Venga 2010–2019 Kia Soul 2009–2020

Will wheels from another vehicle fit your Sorento?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Kia Sorento?

A Kia Sorento (2002–2009) can have a 5x114.3 or 5x139.7 PCD depending on the version: check on an original wheel.

Does a Kia Sorento need a hub centric ring?

The centre bore (hub diameter) of a Kia Sorento is 95.1 or 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Kia Sorento?

The recorded original offset is ET41 to ET47 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Kia Sorento?

The specified tightening torque is 100 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Kia Sorento?

With the same PCD (5x114.3) and the same centre bore (67.1 mm), these include: Kia EV3, Kia EV9, Kia EV6, Kia Sportage V. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.