A Lancia Fulvia (1963–1975) uses a 4x130 PCD and a centre bore of 75.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 75.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 75.1 mm.
Offset: the original is ET23. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/80R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Will wheels from another vehicle fit your Fulvia?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 4x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 75.1 mm, and will not fit if it is smaller.
A Lancia Fulvia (1963–1975) has a PCD of 4x130: 4 studs or bolts spaced around a circle 130 mm in diameter.
Does a Lancia Fulvia need a hub centric ring?
The centre bore (hub diameter) of a Lancia Fulvia is 75.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Lancia Fulvia?
The recorded original offset is ET23. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more