FRENES

Lancia Delta III PCD

2008–2014
VERIFIED
⌀58.1
PCD4x98
Centre bore58.1 mm
Offset (ET)ET31
Fixing typeM12x1.25
Original tyres205/55R16, 225/45R17
Type 844.
Wheel spacers 4x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lancia Delta III

A Lancia Delta III (2008–2014) uses a 4x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x98 required. See all vehicles with 4x98.
  • Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
  • Offset: the original is ET31. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/55R16, 225/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Lancia Delta

Previous generation: Lancia Delta (1993–1999) — same 4x98 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Delta 1993–1999 · 4x98 Delta III 2008–2014

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x98 58.1 mm 7Jx16 ET31 205/55R16
Version 2 4x98 58.1 mm 7Jx17 ET31 225/45R17

Vehicles with the same PCD and centre bore

Same 4x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Lancia Delta III without rings. Offset, width, diameter and caliper clearance still need checking.

Lancia Musa 2004–2012 Lancia Ypsilon 2003–2011 Lancia Lybra 1999–2006 Lancia Y 1995–2003 Lancia Delta 1993–1999 Lancia Delta Integrale 4 trou 1993–1999 Lancia Dedra 1989–2000 Lancia Thema 1989–1995 Lancia Beta 1973–1985 Abarth 500e from 2023 Fiat 500e II from 2020 Abarth 595 2016–2022 RAM RAM 700 Pickup from 2014 Fiat 500e 2013–2019 Fiat Panda III from 2012 Fiat Qubo from 2010

Will wheels from another vehicle fit your Delta III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Lancia Delta III?

A Lancia Delta III (2008–2014) has a PCD of 4x98: 4 studs or bolts spaced around a circle 98 mm in diameter.

Does a Lancia Delta III need a hub centric ring?

The centre bore (hub diameter) of a Lancia Delta III is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lancia Delta III?

The recorded original offset is ET31 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Lancia Delta III?

With the same PCD (4x98) and the same centre bore (58.1 mm), these include: Lancia Musa, Lancia Ypsilon, Lancia Lybra, Lancia Y. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.