Lancia Delta Integrale 5 trou PCD

1994–1999

VERIFIED

Centre bore58.1 mm

Offset (ET)ET35

Fixing type-

Hub centric rings 58.1 mm → Wheel spacers 5x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lancia Delta Integrale 5 trou

A Lancia Delta Integrale 5 trou (1994–1999) uses a 5x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x98 required. See all vehicles with 5x98.
Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
Offset: the original is ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Lancia Delta Integrale 5 trou without rings. Offset, width, diameter and caliper clearance still need checking.

Lancia Phedra 2002–2010 Lancia Zeta 1994–2002 Fiat e-Doblo from 2022 Alfa Romeo 4C 2013–2020 Fiat 500L Trekking from 2013 RAM Promaster City from 2013 Fiat 500L from 2012 Holden Combo from 2011 Fiat Doblo Maxi 2010–2022 Alfa Romeo GT 2003–2010 Peugeot 807 from 2002 Alfa Romeo 147 2001–2010 Fiat Doblo 2001–2005 Alfa Romeo 156 1997–2006 Citroen Jumpy 1996–2006 Peugeot Expert 1996–2006

Will wheels from another vehicle fit your Delta Integrale 5 trou?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Citroen C8 ⌀65.1 Fiat Scudo ⌀65.1 Alfa Romeo 75 5 trou, V6 ⌀58.6

Frequently asked questions

What is the PCD of a Lancia Delta Integrale 5 trou?

A Lancia Delta Integrale 5 trou (1994–1999) has a PCD of 5x98: 5 studs or bolts spaced around a circle 98 mm in diameter.

Does a Lancia Delta Integrale 5 trou need a hub centric ring?

The centre bore (hub diameter) of a Lancia Delta Integrale 5 trou is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lancia Delta Integrale 5 trou?

The recorded original offset is ET35. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Lancia Delta Integrale 5 trou?

With the same PCD (5x98) and the same centre bore (58.1 mm), these include: Lancia Phedra, Lancia Zeta, Fiat e-Doblo, Alfa Romeo 4C. Offset, width and rim diameter still need checking for each vehicle.

Other Lancia models

Flavia 5x114.3 Voyager 5x127 Musa 4x98 Ypsilon 4x98 Phedra 5x98 Thesis 5x108 Lybra 4x98 Y 4x98 Kappa 5x108 Zeta 5x98 Delta 4x98 Delta Integrale 4 trou 4x98 All Lancia →

Does a value look wrong, or is a version missing? Let us know, we check every report.