Lancia Voyager PCD

2011–2015

VERIFIED

Centre bore71.5 mm

Offset (ET)ET40

Fixing typeM12x1.50

Tightening torque160 Nm

Original tyres225/65R17

Hub centric rings 71.5 mm → Wheel spacers 5x127(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lancia Voyager

A Lancia Voyager (2011–2015) uses a 5x127 PCD and a centre bore of 71.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x127 required. See all vehicles with 5x127.
Centre bore: the wheel must have a centre bore of 71.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.5 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x127 PCD and same 71.5 mm centre bore: wheels from these vehicles bolt on and centre on a Lancia Voyager without rings. Offset, width, diameter and caliper clearance still need checking.

Jeep Gladiator from 2019 Jeep Grand Cherokee SRT 2012–2023 Fiat Freemont 2011–2016 Chrysler Pacifica 2004–2008 Dodge Durango 1998–2004

Will wheels from another vehicle fit your Voyager?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Lancia Voyager?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Jeep Gladiator from 2019 Wheels from Fiat Freemont 2011–2016 Wheels from Chrysler Pacifica 2004–2008 Wheels from Dodge Durango 1998–2004

Same PCD, different centre bore

These vehicles also use 5x127 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.5 mm, and will not fit if it is smaller.

Jeep Cherokee ⌀71.6 Dodge Journey ⌀71.6 Dodge Charger ⌀71.6 Jeep Commander ⌀71.6 Chrysler Town and Country ⌀71.6 Dodge Grand Caravan ⌀71.6 Chrysler Grand Voyager ⌀71.6 Buick Roadmaster ⌀78.1

Frequently asked questions

What is the PCD of a Lancia Voyager?

A Lancia Voyager (2011–2015) has a PCD of 5x127: 5 studs or bolts spaced around a circle 127 mm in diameter.

Does a Lancia Voyager need a hub centric ring?

The centre bore (hub diameter) of a Lancia Voyager is 71.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lancia Voyager?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Lancia Voyager?

The specified tightening torque is 160 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Lancia Voyager?

With the same PCD (5x127) and the same centre bore (71.5 mm), these include: Jeep Gladiator, Jeep Grand Cherokee SRT, Fiat Freemont, Chrysler Pacifica. Offset, width and rim diameter still need checking for each vehicle.

Other Lancia models

Flavia 5x114.3 Musa 4x98 Ypsilon 4x98 Phedra 5x98 Thesis 5x108 Lybra 4x98 Y 4x98 Zeta 5x98 Delta Integrale 5 trou 5x98 Kappa 5x108 Delta 4x98 Delta Integrale 4 trou 4x98 All Lancia →

Does a value look wrong, or is a version missing? Let us know, we check every report.