Maxus eDeliver 3 PCD

from 2021

VERIFIED

Centre bore61.1 mm

Offset (ET)ET49

Fixing typeEcrous - 12x1.50

Original tyres185/65R15

Hub centric rings 61.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Maxus eDeliver 3

A Maxus eDeliver 3 (from 2021) uses a 5x114.3 PCD and a centre bore of 61.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 61.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 61.1 mm.
Offset: the original is ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 185/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Will wheels from another vehicle fit your eDeliver 3?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 61.1 mm, and will not fit if it is smaller.

Maxus EV30 ⌀61.4 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1 Mazda Mazda6e ⌀67.1

Frequently asked questions

What is the PCD of a Maxus eDeliver 3?

A Maxus eDeliver 3 (from 2021) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Maxus eDeliver 3 need a hub centric ring?

The centre bore (hub diameter) of a Maxus eDeliver 3 is 61.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Maxus eDeliver 3?

The recorded original offset is ET49. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Other Maxus models

eDeliver 7 5x160 EV80 Plus 5x130 EV80 Pro 5x130 eDeliver 9 5x160 EV30 5x114.3 EV90 5x160 EV80 5x130 All Maxus →

Does a value look wrong, or is a version missing? Let us know, we check every report.