Mazda 929 PCD

1973–1981

VERIFIED

Centre bore60.1 or 59.6 or 67.1 mm

Offset (ET)ET45

Fixing typeEcrous - 12x1.50

Tightening torque115 Nm

Original tyres195/70R14

⚠ This model comes with 4x120 or 4x114.3 or 5x114.3 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 60.1 mm → Wheel spacers 4x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mazda 929

A Mazda 929 (1973–1981) uses a 4x120 or 4x114.3 or 5x114.3 PCD and a centre bore of 60.1 or 59.6 or 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x120 or 4x114.3 or 5x114.3 required. See all vehicles with 4x120.
Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 115 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 195/70R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x120	60.1 mm	—	ET45	195/70R14
Version 2	4x114.3	59.6 mm	—	ET45	—
Version 3	5x114.3	67.1 mm	—	ET45	—

Will wheels from another vehicle fit your 929?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Mazda 929?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Mazda Premacy 1999–2005 Wheels from Mazda MX-5 1990–2005 Wheels from Mazda 626 1979–1982 Wheels from Mitsubishi FTO 1994–2002

Frequently asked questions

What is the PCD of a Mazda 929?

A Mazda 929 (1973–1981) can have a 4x120 or 4x114.3 or 5x114.3 PCD depending on the version: check on an original wheel.

Does a Mazda 929 need a hub centric ring?

The centre bore (hub diameter) of a Mazda 929 is 60.1 or 59.6 or 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mazda 929?

The recorded original offset is ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mazda 929?

The specified tightening torque is 115 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Mazda models

Mazda6e 5x114.3 CX-80 5x114.3 Mazda2 Hybrid 5x100 CX-60 5x114.3 MX-30 5x114.3 CX-30 5x114.3 Mazda2 4x100 CX-3 5x114.3 Mazda3 5x114.3 CX-5 5x114.3 Mazda3 MPS 5x114.3 CX-7 5x114.3 All Mazda →

Does a value look wrong, or is a version missing? Let us know, we check every report.