Mercedes eSprinter PCD

from 2021

VERIFIED

Centre bore84.1 mm

Offset (ET)ET117

Fixing typeM14x1.50

Tightening torque210 Nm

Original tyres205/75R16

Hub centric rings 84.1 mm → Wheel spacers 6x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes eSprinter

A Mercedes eSprinter (from 2021) uses a 6x130 PCD and a centre bore of 84.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x130 required. See all vehicles with 6x130.
Centre bore: the wheel must have a centre bore of 84.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 84.1 mm.
Offset: the original is ET117. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 210 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 6x130 PCD and same 84.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes eSprinter without rings. Offset, width, diameter and caliper clearance still need checking.

Mercedes Sprinter 1995–2000 Volkswagen Crafter 30,35 2006–2013

Will wheels from another vehicle fit your eSprinter?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Mercedes eSprinter?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Mercedes Sprinter 1995–2000 Wheels from Volkswagen Crafter 30,35 2006–2013

Frequently asked questions

What is the PCD of a Mercedes eSprinter?

A Mercedes eSprinter (from 2021) has a PCD of 6x130: 6 studs or bolts spaced around a circle 130 mm in diameter.

Does a Mercedes eSprinter need a hub centric ring?

The centre bore (hub diameter) of a Mercedes eSprinter is 84.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes eSprinter?

The recorded original offset is ET117. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mercedes eSprinter?

The specified tightening torque is 210 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mercedes eSprinter?

With the same PCD (6x130) and the same centre bore (84.1 mm), these include: Mercedes Sprinter, Volkswagen Crafter 30,35. Offset, width and rim diameter still need checking for each vehicle.

Other Mercedes models

G-Classe W465 5x130 E-Classe W214 5x112 EQE 5x112 EQA 5x112 EQS 5x112 EQB 5x112 C-Classe 206 5x112 EQV 5x112 EQC 5x112 GLB-Classe 5x112 A-Classe W177 5x112 E-Classe W213 5x112 All Mercedes →

Does a value look wrong, or is a version missing? Let us know, we check every report.