FRENES

Mercedes Sprinter W906 PCD

2006–2018
VERIFIED
⌀84.1
PCD6x130
Centre bore84.1 mm
Offset (ET)ET51
Fixing typeM14x1.5
Original tyres195/75R16, 205/75R16
Pneus notés LT chez koleso (utilitaire)
Wheel spacers 6x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes Sprinter W906

A Mercedes Sprinter W906 (2006–2018) uses a 6x130 PCD and a centre bore of 84.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x130 required. See all vehicles with 6x130.
  • Centre bore: the wheel must have a centre bore of 84.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 84.1 mm.
  • Offset: the original is ET51. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/75R16, 205/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Mercedes Sprinter

Previous generation: Mercedes Sprinter T1N W901-905 (2000–2006) — the bolt pattern changes (6x130 instead of 5x130): the wheels are not interchangeable. Next generation: Mercedes Sprinter W907 (from 2018) — same 6x130 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Sprinter 1995–2000 · 5x130 Sprinter T1N W901-905 2000–2006 · 5x130 Sprinter W906 2006–2018 Sprinter W907 from 2018 · 6x130 Sprinter W907 Dual from 2018 · 6x205

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x130 84.1 mm 5.5Jx16 ET51 195/75R16
Version 2 6x130 84.1 mm 5.5Jx16 ET51 205/75R16

Will wheels from another vehicle fit your Sprinter W906?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mercedes Sprinter W906?

A Mercedes Sprinter W906 (2006–2018) has a PCD of 6x130: 6 studs or bolts spaced around a circle 130 mm in diameter.

Does a Mercedes Sprinter W906 need a hub centric ring?

The centre bore (hub diameter) of a Mercedes Sprinter W906 is 84.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes Sprinter W906?

The recorded original offset is ET51 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Mercedes Sprinter W906?

With the same PCD (6x130) and the same centre bore (84.1 mm), these include: Mercedes eSprinter, Mercedes Sprinter W907, Mercedes Sprinter, Volkswagen Crafter 30,35. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.