FRENES

Mercedes Sprinter T1N W901-905 PCD

2000–2006
VERIFIED
⌀84.1
PCD5x130
Centre bore84.1 mm
Offset (ET)ET75 to ET83
Fixing typeM14x1.5
Original tyres195/70R15, 205/75R16
Pneus notés LT chez koleso (utilitaire)
Wheel spacers 5x130(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes Sprinter T1N W901-905

A Mercedes Sprinter T1N W901-905 (2000–2006) uses a 5x130 PCD and a centre bore of 84.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x130 required. See all vehicles with 5x130.
  • Centre bore: the wheel must have a centre bore of 84.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 84.1 mm.
  • Offset: the original is ET75 to ET83. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/70R15, 205/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Mercedes Sprinter

Previous generation: Mercedes Sprinter (1995–2000) — same 5x130 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Mercedes Sprinter W906 (2006–2018) — the bolt pattern changes (6x130 instead of 5x130): the wheels are not interchangeable.

Sprinter 1995–2000 · 5x130 Sprinter T1N W901-905 2000–2006 Sprinter W906 2006–2018 · 6x130 Sprinter W907 from 2018 · 6x130 Sprinter W907 Dual from 2018 · 6x205

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x130 84.1 mm 5.5Jx15 ET83 195/70R15
Version 2 5x130 84.1 mm 6Jx16 ET75 205/75R16

Vehicles with the same PCD and centre bore

Same 5x130 PCD and same 84.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes Sprinter T1N W901-905 without rings. Offset, width, diameter and caliper clearance still need checking.

Mercedes G-Classe W465 from 2024 Mercedes Spinter 1995–1999 Mercedes Sprinter 1995–2000 Mercedes G-Classe W461 1991–1997 Mercedes G-Classe W463 1990–2024 Mercedes G-Classe W460 1979–1991 Ssang Yong Actyon from 2006 Ssang Yong Kyron 2005–2016 Ssang Yong Rodius from 2005 Ssang Yong Rexton 2001–2006 Volkswagen LT 28,35 2000–2006 Volkswagen LT 28,35,46 1996–2006

Will wheels from another vehicle fit your Sprinter T1N W901-905?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mercedes Sprinter T1N W901-905?

A Mercedes Sprinter T1N W901-905 (2000–2006) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.

Does a Mercedes Sprinter T1N W901-905 need a hub centric ring?

The centre bore (hub diameter) of a Mercedes Sprinter T1N W901-905 is 84.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes Sprinter T1N W901-905?

The recorded original offset is ET75 to ET83 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Mercedes Sprinter T1N W901-905?

With the same PCD (5x130) and the same centre bore (84.1 mm), these include: Mercedes G-Classe W465, Mercedes Spinter, Mercedes Sprinter, Mercedes G-Classe W461. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.