Mercedes X-Classe PCD

from 2017

VERIFIED

Centre bore66.1 mm

Offset (ET)ET50

Fixing typeM14x1.50

Tightening torque133 Nm

Original tyres255/65R17

Hub centric rings 66.1 mm → Wheel spacers 6x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes X-Classe

A Mercedes X-Classe (from 2017) uses a 6x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x114.3 required. See all vehicles with 6x114.3.
Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 133 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 255/65R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 6x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes X-Classe without rings. Offset, width, diameter and caliper clearance still need checking.

Renault Alaskan from 2016 Nissan Xterra from 2005 Nissan Navara 1998–2004 Nissan Pathfinder 1986–2004

Will wheels from another vehicle fit your X-Classe?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.1 mm, and will not fit if it is smaller.

Dodge Durango ⌀71.6 Dodge Dakota ⌀71.6

Frequently asked questions

What is the PCD of a Mercedes X-Classe?

A Mercedes X-Classe (from 2017) has a PCD of 6x114.3: 6 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Mercedes X-Classe need a hub centric ring?

The centre bore (hub diameter) of a Mercedes X-Classe is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes X-Classe?

The recorded original offset is ET50. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mercedes X-Classe?

The specified tightening torque is 133 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mercedes X-Classe?

With the same PCD (6x114.3) and the same centre bore (66.1 mm), these include: Renault Alaskan, Nissan Xterra, Nissan Navara, Nissan Pathfinder. Offset, width and rim diameter still need checking for each vehicle.

Other Mercedes models

G-Classe W465 5x130 E-Classe W214 5x112 EQE 5x112 EQA 5x112 eSprinter 6x130 EQS 5x112 EQB 5x112 C-Classe 206 5x112 EQV 5x112 EQC 5x112 GLB-Classe 5x112 A-Classe W177 5x112 All Mercedes →

Does a value look wrong, or is a version missing? Let us know, we check every report.