Dodge Dakota PCD

1997–2004

VERIFIED

Centre bore71.6 or 78.1 mm

Offset (ET)ET26 to ET30

Fixing type-

Tightening torque150 Nm

⚠ This model comes with 6x114.3 or 5x139.7 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 71.6 mm → Wheel spacers 6x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Dodge Dakota

A Dodge Dakota (1997–2004) uses a 6x114.3 or 5x139.7 PCD and a centre bore of 71.6 or 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x114.3 or 5x139.7 required. See all vehicles with 6x114.3.
Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
Offset: the original is ET26 to ET30. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -, tightened to 150 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	6x114.3	71.6 mm	—	ET30	—
Version 2	5x139.7	78.1 mm	—	ET26	—

Vehicles with the same PCD and centre bore

Same 6x114.3 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Dodge Dakota without rings. Offset, width, diameter and caliper clearance still need checking.

Dodge Durango 1998–2004

Will wheels from another vehicle fit your Dakota?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.6 mm, and will not fit if it is smaller.

Mercedes X-Classe ⌀66.1 Renault Alaskan ⌀66.1 Nissan Xterra ⌀66.1 Nissan Navara ⌀66.1 Nissan Pathfinder ⌀66.1

Frequently asked questions

What is the PCD of a Dodge Dakota?

A Dodge Dakota (1997–2004) can have a 6x114.3 or 5x139.7 PCD depending on the version: check on an original wheel.

Does a Dodge Dakota need a hub centric ring?

The centre bore (hub diameter) of a Dodge Dakota is 71.6 or 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Dodge Dakota?

The recorded original offset is ET26 to ET30 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Dodge Dakota?

The specified tightening torque is 150 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Dodge Dakota?

With the same PCD (6x114.3) and the same centre bore (71.6 mm), these include: Dodge Durango. Offset, width and rim diameter still need checking for each vehicle.

Other Dodge models

Dart 5x110 Challenger 5x115 Journey 5x127 Avenger 5x114.3 Nitro 5x114.3 Caliber 5x114.3 Charger 5x115 Magnum 5x115 Magnum 4x4 5x115 Neon SRT4 5x100 Caravan 5x114.3 Grand Caravan 5x114.3 All Dodge →

Does a value look wrong, or is a version missing? Let us know, we check every report.