FRENES

Mercury Sable PCD

1986–1992
VERIFIED
⌀63.4
PCD5x108
Centre bore63.4 mm
Offset (ET)ET42
Fixing typeEcrous - 12x1.50
Hub centric rings 63.4 mm → Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercury Sable

A Mercury Sable (1986–1992) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET42. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Mercury Sable without rings. Offset, width, diameter and caliper clearance still need checking.

Mercury Mystique 1995–2001 Mercury Cougar 1994–1998 Zeekr 9X from 2025 Lynk&Co 02 from 2024 Polestar Polestar 4 from 2024 Volvo EC40 from 2024 Volvo EX40 axe arrière from 2024 Volvo EX40 axe avant from 2024 Zeekr 7X from 2024 Ford Tourneo Courier from 2023 Ford Transit Courier from 2023 Lynk&Co 08 from 2023 Polestar Polestar 3 axe arrière from 2023 Polestar Polestar 3 axe avant from 2023 Smart #3 from 2023 Volvo EX30 from 2023

Will wheels from another vehicle fit your Sable?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mercury Sable?

A Mercury Sable (1986–1992) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Mercury Sable need a hub centric ring?

The centre bore (hub diameter) of a Mercury Sable is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercury Sable?

The recorded original offset is ET42. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Mercury Sable?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Mercury Mystique, Mercury Cougar, Zeekr 9X, Lynk&Co 02. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.