FRENES

Mini Cooper (J01) PCD

from 2024
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET40 to ET50
Fixing typeM14x1.25
Tightening torque140 Nm
Original tyres195/60R16, 205/50R17, 225/40R18
Koleso (F66/J01 2024-) : 5x112, 66.6, M14x1.25, 140 N·m ; pneus OEM électriques sans jante/ET. Jantes/ET d'après tirewheelguide 2025 (marchés Japon / Amérique latine, pas de ligne Europe). wheelmeasure 2024-2025 : 5x112, 66.6.
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mini Cooper (J01)

A Mini Cooper (J01) (from 2024) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET40 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/60R16, 205/50R17, 225/40R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Mini Cooper

Previous generation: Mini Cooper F57 Cabriolet (2016–2024) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Cooper 1959–2000 · 4x100 Cooper R52 Cabriolet 2004–2008 · 4x100 Cooper R56 2006–2014 · 4x100 Cooper R57 Cabriolet 2009–2015 · 4x100 Cooper F55 5 portes 2014–2024 · 5x112 Cooper F56 3 portes (Cooper S, JCW) 2014–2024 · 5x112 Cooper F57 Cabriolet 2016–2024 · 5x112 Cooper (J01) from 2024 Cooper F66 from 2024 · 5x112

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Cooper E / SE 5x112 66.6 mm 6.5Jx16 ET40 195/60R16
Cooper E 5x112 66.6 mm 7Jx17 ET41 205/50R17
Cooper SE 5x112 66.6 mm 6.5Jx17 ET40 205/50R17
JCW E 5x112 66.6 mm 7.5Jx18 ET50 225/40R18

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a Mini Cooper (J01) without rings. Offset, width, diameter and caliper clearance still need checking.

Mini Aceman J05 from 2024 Mini Cooper F66 from 2024 Mini Countryman U25 from 2024 Mini Countryman F60 2017–2024 Mini Cooper F57 Cabriolet 2016–2024 Mini Clubman F54 2015–2024 Mini Cooper F55 5 portes 2014–2024 Mini Cooper F56 3 portes (Cooper S, JCW) 2014–2024 Mini Countryman 2010–2016 BMW 2 Serie Gran Coupe F74 from 2025 MG S5 EV from 2025 BMW 1 Serie F70 from 2024 BMW iX2 U10 from 2024 BMW X2 U10 from 2024 BMW X3 G45 from 2024 Mercedes AMG GT C192 from 2024

Will wheels from another vehicle fit your Cooper (J01)?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mini Cooper (J01)?

A Mini Cooper (J01) (from 2024) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Mini Cooper (J01) need a hub centric ring?

The centre bore (hub diameter) of a Mini Cooper (J01) is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mini Cooper (J01)?

The recorded original offset is ET40 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mini Cooper (J01)?

The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mini Cooper (J01)?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: Mini Aceman J05, Mini Cooper F66, Mini Countryman U25, Mini Countryman F60. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.