Opel Blitz PCD

1965–1975
VERIFIED
⌀161
Centre bore161 mm
Offset (ET)ET121
Fixing type-

Fitting wheels on a Opel Blitz

A Opel Blitz (1965–1975) uses a 6x205 PCD and a centre bore of 161 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x205 required. See all vehicles with 6x205.
  • Centre bore: the wheel must have a centre bore of 161 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 161 mm.
  • Offset: the original is ET121. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Will wheels from another vehicle fit your Blitz?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Opel Blitz?

A Opel Blitz (1965–1975) has a PCD of 6x205: 6 studs or bolts spaced around a circle 205 mm in diameter.

Does a Opel Blitz need a hub centric ring?

The centre bore (hub diameter) of a Opel Blitz is 161 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Blitz?

The recorded original offset is ET121. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Opel Blitz?

With the same PCD (6x205) and the same centre bore (161 mm), these include: Mercedes Sprinter Dual, Volkswagen LT Double, Mercedes T2. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.