Opel Calibra A 4 trou PCD

1990–1997

VERIFIED

Centre bore56.5 mm

Offset (ET)ET49

Fixing typeM12x1.50

Tightening torque110 Nm

Hub centric rings 56.5 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Calibra A 4 trou

A Opel Calibra A 4 trou (1990–1997) uses a 4x100 PCD and a centre bore of 56.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 56.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.5 mm.
Offset: the original is ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.5 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Calibra A 4 trou without rings. Offset, width, diameter and caliper clearance still need checking.

Opel Astra G 4 trou 1998–2004 Chevrolet Aveo 4 trou 2011–2016 Chevrolet Aveo 2006–2011

Will wheels from another vehicle fit your Calibra A 4 trou?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.5 mm, and will not fit if it is smaller.

Opel Karl ⌀56.6 Opel Adam Rocks ⌀56.6 Opel Corsa E ⌀56.6 Opel Adam ⌀56.6 Opel Corsa D 4 trou ⌀56.6 Opel Astra H 4 trou ⌀56.6 Opel Tigra Twin Top ⌀56.6 Opel Meriva 4 trou ⌀56.6

Frequently asked questions

What is the PCD of a Opel Calibra A 4 trou?

A Opel Calibra A 4 trou (1990–1997) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Opel Calibra A 4 trou need a hub centric ring?

The centre bore (hub diameter) of a Opel Calibra A 4 trou is 56.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Calibra A 4 trou?

The recorded original offset is ET49. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Calibra A 4 trou?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Opel Calibra A 4 trou?

With the same PCD (4x100) and the same centre bore (56.5 mm), these include: Opel Astra G 4 trou, Chevrolet Aveo 4 trou, Chevrolet Aveo. Offset, width and rim diameter still need checking for each vehicle.

Other Opel models

Rocks-E 4x108 Zafira Life 5x108 Corsa F 4x108 Ampera-e 5x105 Crossland X 4x108 Grandland X 5x108 Adam S 5x110 Karl 4x100 Astra K 5x105 Adam Rocks 4x100 Corsa E 4x100 Insignia Country Tourer 5x120 All Opel →

Does a value look wrong, or is a version missing? Let us know, we check every report.