Opel Senator A PCD

1978–1987
VERIFIED
⌀69.5
Centre bore69.5 mm
Offset (ET)ET49
Fixing typeEcrous - 12x1.50

Fitting wheels on a Opel Senator A

A Opel Senator A (1978–1987) uses a 5x120 PCD and a centre bore of 69.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x120 required. See all vehicles with 5x120.
  • Centre bore: the wheel must have a centre bore of 69.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 69.5 mm.
  • Offset: the original is ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Will wheels from another vehicle fit your Senator A?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Opel Senator A?

A Opel Senator A (1978–1987) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Opel Senator A need a hub centric ring?

The centre bore (hub diameter) of a Opel Senator A is 69.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Senator A?

The recorded original offset is ET49. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Opel Senator A?

With the same PCD (5x120) and the same centre bore (69.5 mm), these include: Opel Monza A, Opel Commodore, Pontiac GTO. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.