A Opel Insignia Country Tourer (2013–2017) uses a 5x120 PCD and a centre bore of 67.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
Offset: the original is ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 150 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/55R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Vehicles with the same PCD and centre bore
Same 5x120 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Insignia Country Tourer without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your Insignia Country Tourer?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 67.1 mm, and will not fit if it is smaller.
What is the PCD of a Opel Insignia Country Tourer?
A Opel Insignia Country Tourer (2013–2017) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.
Does a Opel Insignia Country Tourer need a hub centric ring?
The centre bore (hub diameter) of a Opel Insignia Country Tourer is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Opel Insignia Country Tourer?
The recorded original offset is ET41. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Opel Insignia Country Tourer?
The specified tightening torque is 150 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Opel Insignia Country Tourer?
With the same PCD (5x120) and the same centre bore (67.1 mm), these include: Opel Insignia, Opel Insignia OPC, MG Marvel R, Saab 9-5. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more