FRENES

Opel Meriva OPC PCD

2006–2010
VERIFIED
⌀65.1
PCD5x110
Centre bore65.1 mm
Offset (ET)ET49
Fixing typeM12x1.50
Tightening torque110 Nm
Hub centric rings 65.1 mm → Wheel spacers 5x110(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Meriva OPC

A Opel Meriva OPC (2006–2010) uses a 5x110 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x110 required. See all vehicles with 5x110.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x110 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Meriva OPC without rings. Offset, width, diameter and caliper clearance still need checking.

Opel Adam S from 2015 Opel Meriva from 2010 Opel Corsa D OPC 2007–2014 Opel Corsa D 5 trou 2006–2014 Opel GT Convertible from 2006 Opel Zafira OPC 2006–2011 Opel Vectra C OPC 2005–2008 Opel Astra H 5 trou 2004–2009 Opel Meriva 5 trou 2003–2010 Opel Signum 2003–2008 Opel Vectra C 2002–2009 Opel Combo 5 trou 2001–2010 Opel Corsa C 5 trou 2000–2006 Opel Speedster 2000–2005 Opel Zafira 1999–2005 Opel Astra G 5 trou 1998–2004

Will wheels from another vehicle fit your Meriva OPC?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x110 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Dodge Stratus ⌀57.1

Frequently asked questions

What is the PCD of a Opel Meriva OPC?

A Opel Meriva OPC (2006–2010) has a PCD of 5x110: 5 studs or bolts spaced around a circle 110 mm in diameter.

Does a Opel Meriva OPC need a hub centric ring?

The centre bore (hub diameter) of a Opel Meriva OPC is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Meriva OPC?

The recorded original offset is ET49. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Meriva OPC?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Opel Meriva OPC?

With the same PCD (5x110) and the same centre bore (65.1 mm), these include: Opel Adam S, Opel Meriva, Opel Corsa D OPC, Opel Corsa D 5 trou. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.