FRENES

Opel Mokka PCD

2012–2016
VERIFIED
⌀56.6
PCD5x105 or 4x108
Centre bore56.6 or 65.1 mm
Offset (ET)ET38 to ET39
Fixing typeEcrous - 12x1.50
Tightening torque140 Nm
Original tyres205/70R16, 215/65R16
⚠ This model comes with 5x105 or 4x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 56.6 mm → Wheel spacers 5x105(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Mokka

A Opel Mokka (2012–2016) uses a 5x105 or 4x108 PCD and a centre bore of 56.6 or 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x105 or 4x108 required. See all vehicles with 5x105.
  • Centre bore: the wheel must have a centre bore of 56.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.6 mm.
  • Offset: the original is ET38 to ET39. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/70R16, 215/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x105 56.6 mm 6.5Jx16 ET39 205/70R16
Version 2 4x108 65.1 mm 6.5Jx16 ET38 215/65R16

Vehicles with the same PCD and centre bore

Same 5x105 PCD and same 56.6 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Mokka without rings. Offset, width, diameter and caliper clearance still need checking.

Opel Ampera-e from 2017 Opel Astra K from 2015 Chevrolet Bolt EV from 2017 Chevrolet Trax from 2013 Buick Encore 2012–2022 Holden Cruze Wagon Essence from 2012 Chevrolet Aveo 5 trou 2011–2016 Holden Barina 5 trou from 2011 Holden Cruze Essence from 2009 Chevrolet Tracker 1999–2009

Will wheels from another vehicle fit your Mokka?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Opel Mokka?

A Opel Mokka (2012–2016) can have a 5x105 or 4x108 PCD depending on the version: check on an original wheel.

Does a Opel Mokka need a hub centric ring?

The centre bore (hub diameter) of a Opel Mokka is 56.6 or 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Mokka?

The recorded original offset is ET38 to ET39 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Mokka?

The specified tightening torque is 140 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Opel Mokka?

With the same PCD (5x105) and the same centre bore (56.6 mm), these include: Opel Ampera-e, Opel Astra K, Chevrolet Bolt EV, Chevrolet Trax. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.