FRENES

Peugeot 504 PCD

1968–1983
VERIFIED
⌀63.5
PCD4x140
Centre bore63.5 mm
Offset (ET)ET25
Fixing typeEcrous - 12x1.25
Original tyres190/65R15
Hub centric rings 63.5 mm → Wheel spacers 4x140(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Peugeot 504

A Peugeot 504 (1968–1983) uses a 4x140 PCD and a centre bore of 63.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x140 required. See all vehicles with 4x140.
  • Centre bore: the wheel must have a centre bore of 63.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.5 mm.
  • Offset: the original is ET25. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 190/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x140 PCD and same 63.5 mm centre bore: wheels from these vehicles bolt on and centre on a Peugeot 504 without rings. Offset, width, diameter and caliper clearance still need checking.

Peugeot 505 1979–1992

Will wheels from another vehicle fit your 504?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Peugeot 504?

A Peugeot 504 (1968–1983) has a PCD of 4x140: 4 studs or bolts spaced around a circle 140 mm in diameter.

Does a Peugeot 504 need a hub centric ring?

The centre bore (hub diameter) of a Peugeot 504 is 63.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Peugeot 504?

The recorded original offset is ET25. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Peugeot 504?

With the same PCD (4x140) and the same centre bore (63.5 mm), these include: Peugeot 505. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.