FRENES

Renault Clio 1 PCD

1991–1998
VERIFIED
⌀60.1
PCD4x100
Centre bore60.1 mm
Offset (ET)ET31 to ET46
Fixing typeM12x1.50
Tightening torque90 Nm
Original tyres155/70R13, 165/70R13, 185/60R15, 185/65R15
Hub centric rings 60.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Renault Clio 1

A Renault Clio 1 (1991–1998) uses a 4x100 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET31 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 90 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 155/70R13, 165/70R13, 185/60R15, 185/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (6)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 60.1 mm — ET36 155/70R13
Version 2 4x100 60.1 mm — ET36 165/70R13
Version 3 4x100 60.1 mm — ET45 185/60R15
Version 4 4x100 60.1 mm — ET40 185/65R15
Version 5 4x100 60.1 mm — ET31 185/65R15
Version 6 4x100 60.1 mm — ET46 195/60R16

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Renault Clio 1 without rings. Offset, width, diameter and caliper clearance still need checking.

Renault Twingo E-Tech from 2026 Renault Clio 5 from 2019 Renault Twingo 3 2014–2024 Renault Captur I 2013–2020 Renault Clio GrandTour 2013–2023 Renault Zoe 2013–2024 Renault Clio 4 2012–2019 Renault Wind 2010–2013 Renault Twingo RS 2009–2014 Renault Clio Kombi 2008–2012 Renault Kangoo 2 4 trou 2008–2013 Renault Twingo 2 2007–2014 Renault Clio 3 2005–2014 Renault Modus 2004–2012 Renault Grand Scenic 2003–2009 Renault Clio 2 1998–2005

Will wheels from another vehicle fit your Clio 1?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Renault Clio 1?

A Renault Clio 1 (1991–1998) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Renault Clio 1 need a hub centric ring?

The centre bore (hub diameter) of a Renault Clio 1 is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Renault Clio 1?

The recorded original offset is ET31 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Renault Clio 1?

The specified tightening torque is 90 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Renault Clio 1?

With the same PCD (4x100) and the same centre bore (60.1 mm), these include: Renault Twingo E-Tech, Renault Clio 5, Renault Twingo 3, Renault Captur I. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.