FRENES

Renault Megane 2 PCD

2002–2009
VERIFIED
⌀60.1
PCD4x100
Centre bore60.1 mm
Offset (ET)ET45 to ET49
Fixing typeM12x1.5
Tightening torque105 Nm
Original tyres195/65R15, 205/55R16, 205/50R17
Versions 4 trous ; RS et certaines versions en 5x108
Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Renault Megane 2

A Renault Megane 2 (2002–2009) uses a 4x100 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET45 to ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 105 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 205/55R16, 205/50R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Renault Megane

Previous generation: Renault Megane 1 (1995–2002) — same 4x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Renault Megane 2 RS (2004–2009) — the bolt pattern changes (5x108 instead of 4x100): the wheels are not interchangeable.

Megane 1 1995–2002 · 4x100 Megane 2 2002–2009 Megane 2 RS 2004–2009 · 5x108 Megane 3 2008–2016 · 5x114.3 Megane 4 2016–2023 · 5x114.3 Megane 4 RS 2018–2023 · 5x114.3

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 60.1 mm 6.5Jx15 ET45 195/65R15
Version 2 4x100 60.1 mm 6.5Jx16 ET49 205/55R16
Version 3 4x100 60.1 mm 6.5Jx17 ET49 205/50R17

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Renault Megane 2 without rings. Offset, width, diameter and caliper clearance still need checking.

Renault Twingo E-Tech from 2026 Renault Clio 5 from 2019 Renault Twingo 3 2014–2024 Renault Captur I 2013–2020 Renault Clio GrandTour 2013–2023 Renault Zoe 2013–2024 Renault Clio 4 2012–2019 Renault Wind 2010–2013 Renault Twingo RS 2009–2014 Renault Clio Kombi 2008–2012 Renault Kangoo 2 4 trou 2008–2013 Renault Twingo 2 2007–2014 Renault Clio 3 2005–2014 Renault Modus 2004–2012 Renault Grand Scenic 2003–2009 Renault Clio 2 1998–2005

Will wheels from another vehicle fit your Megane 2?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Renault Megane 2?

A Renault Megane 2 (2002–2009) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Renault Megane 2 need a hub centric ring?

The centre bore (hub diameter) of a Renault Megane 2 is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Renault Megane 2?

The recorded original offset is ET45 to ET49 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Renault Megane 2?

The specified tightening torque is 105 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Renault Megane 2?

With the same PCD (4x100) and the same centre bore (60.1 mm), these include: Renault Twingo E-Tech, Renault Clio 5, Renault Twingo 3, Renault Captur I. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.