FRENES

Renault Megane 3 PCD

2008–2016
VERIFIED
⌀66.1
PCD5x114.3
Centre bore66.1 mm
Offset (ET)ET43 to ET49
Fixing typeM12x1.5
Tightening torque110 Nm
Original tyres195/65R15, 205/65R15, 205/55R16, 205/60R16
Hors Mégane R.S. (couple de serrage 130 Nm).
Hub centric rings 66.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Renault Megane 3

A Renault Megane 3 (2008–2016) uses a 5x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
  • Offset: the original is ET43 to ET49. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 205/65R15, 205/55R16, 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (6)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 66.1 mm 6.5Jx15 ET43 195/65R15
Version 2 5x114.3 66.1 mm 6.5Jx15 ET43 205/65R15
Version 3 5x114.3 66.1 mm 6.5Jx15 ET47 205/65R15
Version 4 5x114.3 66.1 mm 6.5Jx16 ET47 205/55R16
Version 5 5x114.3 66.1 mm 6.5Jx16 ET47 205/60R16
Version 6 5x114.3 66.1 mm 7Jx17 ET49 205/55R17

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Renault Megane 3 without rings. Offset, width, diameter and caliper clearance still need checking.

Renault 4 E-Tech from 2025 Renault 5 E-Tech from 2024 Renault Grand Kangoo from 2024 Renault Rafale from 2024 Renault Symbioz from 2024 Renault Scenic E-Tech from 2023 Renault Austral from 2022 Renault Megane E-Tech from 2022 Renault Arkana from 2020 Renault Captur II from 2019 Renault Megane 4 2016–2023 Renault Scenic 2016–2023 Renault Espace 2015–2023 Renault Kadjar from 2015 Renault Talisman from 2015 Renault Captur I 2013–2020

Will wheels from another vehicle fit your Megane 3?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Renault Megane 3?

A Renault Megane 3 (2008–2016) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Renault Megane 3 need a hub centric ring?

The centre bore (hub diameter) of a Renault Megane 3 is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Renault Megane 3?

The recorded original offset is ET43 to ET49 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Renault Megane 3?

The specified tightening torque is 110 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Renault Megane 3?

With the same PCD (5x114.3) and the same centre bore (66.1 mm), these include: Renault 4 E-Tech, Renault 5 E-Tech, Renault Grand Kangoo, Renault Rafale. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.