Rover 75 PCD

1999–2006

VERIFIED

Centre bore56.1 mm

Offset (ET)ET50

Fixing typeM14x1.50

Tightening torque125 Nm

Original tyres195/65R15

Hub centric rings 56.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Rover 75

A Rover 75 (1999–2006) uses a 5x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x100 required. See all vehicles with 5x100.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 125 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 195/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Rover 75 without rings. Offset, width, diameter and caliper clearance still need checking.

Subaru BRZ from 2012 Toyota GT 86 from 2012 Subaru XV 2011–2017 Saab 9-2X 2004–2006 Subaru Baja 2002–2007 MG ZT 2001–2005 Subaru Impreza WRX STi 2000–2005 Subaru Outback 1998–2003 Subaru Forester 1997–2002 Subaru Impreza 1993–2000 Subaru Legacy 1989–2003

Will wheels from another vehicle fit your 75?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Rover 75?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Subaru Forester 1997–2002 Wheels from Subaru Impreza 1993–2000 Wheels from Subaru Legacy 1989–2003

Same PCD, different centre bore

These vehicles also use 5x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.

Mazda Mazda2 Hybrid ⌀54.1 MG Astor ⌀57.1 Skoda Fabia IV ⌀57.1 Toyota Aygo X ⌀60.1 Volkswagen Taigo ⌀57.1 Skoda Kamiq GT ⌀57.1 Toyota Yaris IV ⌀54.1 Audi A1 Citycarver ⌀57.1

Frequently asked questions

What is the PCD of a Rover 75?

A Rover 75 (1999–2006) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Rover 75 need a hub centric ring?

The centre bore (hub diameter) of a Rover 75 is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Rover 75?

The recorded original offset is ET50. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Rover 75?

The specified tightening torque is 125 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Rover 75?

With the same PCD (5x100) and the same centre bore (56.1 mm), these include: Subaru BRZ, Toyota GT 86, Subaru XV, Saab 9-2X. Offset, width and rim diameter still need checking for each vehicle.

Other Rover models

CityRover 4x100 Streetwise 4x100 25 4x100 45 4x100 MGF Roadster 4x95.25 600-Serie 4x114.3 100-Serie 4x95.25 200-Serie 4x100 400-Serie 4x100 800-Serie 4x114.3 All Rover →

Does a value look wrong, or is a version missing? Let us know, we check every report.