FRENES

Skoda Octavia II PCD

2004–2013
VERIFIED
⌀57.1
PCD5x112
Centre bore57.1 mm
Offset (ET)ET47 to ET54
Fixing typeM14x1.5
Original tyres195/65R15, 205/60R15, 205/55R16, 225/45R17
Wheel spacers for this vehicle, from €29.95(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Skoda Octavia II

A Skoda Octavia II (2004–2013) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET47 to ET54. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 205/60R15, 205/55R16, 225/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Skoda Octavia

Previous generation: Skoda Octavia I (1997–2005) — the bolt pattern changes (5x112 instead of 5x100): the wheels are not interchangeable. Next generation: Skoda Octavia III (2013–2020) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Octavia I 1997–2005 · 5x100 Octavia II 2004–2013 Octavia III 2013–2020 · 5x112 Octavia IV from 2020 · 5x112

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 57.1 mm 6Jx15 ET47 195/65R15
Version 2 5x112 57.1 mm 6.5Jx15 ET50 205/60R15
Version 3 5x112 57.1 mm 6.5Jx16 ET50 205/55R16
Version 4 5x112 57.1 mm 7Jx17 ET54 225/45R17

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Skoda Octavia II without rings. Offset, width, diameter and caliper clearance still need checking.

Skoda Elroq from 2024 Skoda Kodiaq II from 2024 Skoda Superb IV from 2024 Skoda Enyaq from 2020 Skoda Octavia IV from 2020 Skoda Kodiaq GT from 2019 Skoda Karoq from 2017 Skoda Kodiaq from 2017 Skoda Superb III 2015–2024 Skoda Octavia III 2013–2020 Skoda Yeti 2009–2014 Skoda Octavia Scout 2007–2009 Skoda Superb 2002–2008 Skoda Octavia I 1997–2005 Cupra Terramar from 2024 Ford Capri from 2024

Will wheels from another vehicle fit your Octavia II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Skoda Octavia II?

A Skoda Octavia II (2004–2013) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Skoda Octavia II need a hub centric ring?

The centre bore (hub diameter) of a Skoda Octavia II is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Skoda Octavia II?

The recorded original offset is ET47 to ET54 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Skoda Octavia II?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: Skoda Elroq, Skoda Kodiaq II, Skoda Superb IV, Skoda Enyaq. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.