Skoda Superb III PCD

2015–2024
VERIFIED
⌀57.1
Centre bore57.1 mm
Offset (ET)ET40 to ET44
Fixing typeM14x1.5
Tightening torque140 Nm
Original tyres205/60R16, 215/60R16, 215/55R17, 235/45R18
Restylage 2019 identique

Fitting wheels on a Skoda Superb III

A Skoda Superb III (2015–2024) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET40 to ET44. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/60R16, 215/60R16, 215/55R17, 235/45R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Skoda Superb

Previous generation: Skoda Superb (2002–2008) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Skoda Superb IV (from 2024) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

All recorded versions (6)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 57.1 mm 6.5Jx16 ET41 205/60R16
Version 2 5x112 57.1 mm 6.5Jx16 ET41 215/60R16
Version 3 5x112 57.1 mm 6.5Jx17 ET41 215/55R17
Version 4 5x112 57.1 mm 7Jx17 ET40 215/55R17
Version 5 5x112 57.1 mm 8Jx18 ET44 235/45R18
Version 6 5x112 57.1 mm 8Jx19 ET44 235/40R19

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Skoda Superb III without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your Superb III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Skoda Superb III?

A Skoda Superb III (2015–2024) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Skoda Superb III need a hub centric ring?

The centre bore (hub diameter) of a Skoda Superb III is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Skoda Superb III?

The recorded original offset is ET40 to ET44 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Skoda Superb III?

The specified tightening torque is 140 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Skoda Superb III?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: Skoda Elroq, Skoda Kodiaq II, Skoda Superb IV, Skoda Enyaq. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.