FRENES

Skoda Superb PCD

2002–2008
VERIFIED
⌀57.1
PCD5x112
Centre bore57.1 mm
Offset (ET)ET37 to ET47
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres205/55R16, 215/60R16, 215/55R17
Hub centric rings 57.1 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Skoda Superb

A Skoda Superb (2002–2008) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET37 to ET47. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/55R16, 215/60R16, 215/55R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 57.1 mm — ET37 205/55R16
Version 2 5x112 57.1 mm — ET47 205/55R16
Version 3 5x112 57.1 mm — ET41 215/60R16
Version 4 5x112 57.1 mm — ET41 215/55R17

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Skoda Superb without rings. Offset, width, diameter and caliper clearance still need checking.

Skoda Elroq from 2024 Skoda Enyaq from 2020 Skoda Octavia IV from 2020 Skoda Kodiaq GT from 2019 Skoda Karoq from 2017 Skoda Kodiaq from 2017 Skoda Octavia III 2013–2020 Skoda Yeti 2009–2014 Skoda Octavia Scout 2007–2009 Skoda Octavia I 1997–2005 Cupra Terramar from 2024 Ford Capri from 2024 Ford Explorer EV from 2024 Volkswagen Passat B9 from 2024 Volkswagen Tayron from 2024 Cupra Tavascan from 2023

Will wheels from another vehicle fit your Superb?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Skoda Superb?

A Skoda Superb (2002–2008) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Skoda Superb need a hub centric ring?

The centre bore (hub diameter) of a Skoda Superb is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Skoda Superb?

The recorded original offset is ET37 to ET47 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Skoda Superb?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Skoda Superb?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: Skoda Elroq, Skoda Enyaq, Skoda Octavia IV, Skoda Kodiaq GT. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.