FRENES

Skoda Fabia IV PCD

from 2021
VERIFIED
⌀57.1
PCD5x100
Centre bore57.1 mm
Offset (ET)ET40 to ET51
Fixing typeM14x1.5
Tightening torque120 Nm
Original tyres185/65R15, 195/55R16, 215/45R17
Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Skoda Fabia IV

A Skoda Fabia IV (from 2021) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x100 required. See all vehicles with 5x100.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET40 to ET51. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/65R15, 195/55R16, 215/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x100 57.1 mm 5.5Jx15 ET40 185/65R15
Version 2 5x100 57.1 mm 6Jx16 ET45 195/55R16
Version 3 5x100 57.1 mm 7Jx17 ET51 215/45R17

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Skoda Fabia IV without rings. Offset, width, diameter and caliper clearance still need checking.

Skoda Kamiq GT from 2020 Skoda Kamiq from 2019 Skoda Scala from 2019 Skoda Fabia 14 inch 2014–2021 Skoda Fabia 15 inch 2014–2021 Skoda Rapid 2012–2020 Skoda Fabia Scout 2009–2014 Skoda Roomster Scout 2007–2015 Skoda Roomster 2006–2015 Skoda Fabia RS 2003–2007 Skoda Praktik 2003–2015 Skoda Fabia I 2000–2007 Skoda Octavia I 1997–2005 MG Astor from 2021 Volkswagen Taigo from 2021 Audi A1 Citycarver 2019–2022

Will wheels from another vehicle fit your Fabia IV?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Skoda Fabia IV?

A Skoda Fabia IV (from 2021) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Skoda Fabia IV need a hub centric ring?

The centre bore (hub diameter) of a Skoda Fabia IV is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Skoda Fabia IV?

The recorded original offset is ET40 to ET51 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Skoda Fabia IV?

The specified tightening torque is 120 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Skoda Fabia IV?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Skoda Kamiq GT, Skoda Kamiq, Skoda Scala, Skoda Fabia 14 inch. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.