TVR Chimaera 4.0-5.0-V8 PCD

1992–2003

VERIFIED

Centre bore63.3 mm

Offset (ET)ET40

Fixing type-

Hub centric rings 63.3 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a TVR Chimaera 4.0-5.0-V8

A TVR Chimaera 4.0-5.0-V8 (1992–2003) uses a 4x108 PCD and a centre bore of 63.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x108 required. See all vehicles with 4x108.
Centre bore: the wheel must have a centre bore of 63.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.3 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 63.3 mm centre bore: wheels from these vehicles bolt on and centre on a TVR Chimaera 4.0-5.0-V8 without rings. Offset, width, diameter and caliper clearance still need checking.

TVR Chimaera 4.6 1995–2002 TVR Griffith 1991–2002 Ford Taunus 1970–1983

Will wheels from another vehicle fit your Chimaera 4.0-5.0-V8?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 63.3 mm, and will not fit if it is smaller.

Alfa Romeo Junior ⌀65.1 Fiat 600 ⌀65.1 Fiat 600E ⌀65.1 Fiat Topolino ⌀65.1 Jeep Avenger ⌀65.1 Peugeot e-208 ⌀65.1 Opel Rocks-E ⌀65.1 Citroen Ami ⌀65.1

Frequently asked questions

What is the PCD of a TVR Chimaera 4.0-5.0-V8?

A TVR Chimaera 4.0-5.0-V8 (1992–2003) has a PCD of 4x108: 4 studs or bolts spaced around a circle 108 mm in diameter.

Does a TVR Chimaera 4.0-5.0-V8 need a hub centric ring?

The centre bore (hub diameter) of a TVR Chimaera 4.0-5.0-V8 is 63.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a TVR Chimaera 4.0-5.0-V8?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a TVR Chimaera 4.0-5.0-V8?

With the same PCD (4x108) and the same centre bore (63.3 mm), these include: TVR Chimaera 4.6, TVR Griffith, Ford Taunus. Offset, width and rim diameter still need checking for each vehicle.

Other TVR models

Sagaris 5x114.3 T350 5x114.3 Tamora 5x114.3 Tuscan Speed 6 5x114.3 Cerbera 5x114.3 Chimaera 4.6 4x108 Griffith 4x108 All TVR →

Does a value look wrong, or is a version missing? Let us know, we check every report.