TVR Tamora PCD

2002–2006

VERIFIED

Centre bore70.1 mm

Offset (ET)ET40

Fixing type-

Hub centric rings 70.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a TVR Tamora

A TVR Tamora (2002–2006) uses a 5x114.3 PCD and a centre bore of 70.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 70.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 70.1 mm centre bore: wheels from these vehicles bolt on and centre on a TVR Tamora without rings. Offset, width, diameter and caliper clearance still need checking.

TVR Sagaris 2005–2006 TVR T350 2002–2006 TVR Tuscan Speed 6 1999–2006

Will wheels from another vehicle fit your Tamora?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.1 mm, and will not fit if it is smaller.

TVR Cerbera ⌀71.6 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1 Leapmotor C10 ⌀73.1 Mazda CX-80 ⌀67.1 Mazda Mazda6e ⌀67.1

Frequently asked questions

What is the PCD of a TVR Tamora?

A TVR Tamora (2002–2006) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a TVR Tamora need a hub centric ring?

The centre bore (hub diameter) of a TVR Tamora is 70.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a TVR Tamora?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a TVR Tamora?

With the same PCD (5x114.3) and the same centre bore (70.1 mm), these include: TVR Sagaris, TVR T350, TVR Tuscan Speed 6. Offset, width and rim diameter still need checking for each vehicle.

Other TVR models

Sagaris 5x114.3 T350 5x114.3 Tuscan Speed 6 5x114.3 Cerbera 5x114.3 Chimaera 4.6 4x108 Chimaera 4.0-5.0-V8 4x108 Griffith 4x108 All TVR →

Does a value look wrong, or is a version missing? Let us know, we check every report.