TVR Cerbera PCD

1996–2003

VERIFIED

Centre bore71.6 mm

Offset (ET)ET40

Fixing type-

Original tyres235/45R17

Hub centric rings 71.6 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a TVR Cerbera

A TVR Cerbera (1996–2003) uses a 5x114.3 PCD and a centre bore of 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x114.3 required. See all vehicles with 5x114.3.
Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 235/45R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a TVR Cerbera without rings. Offset, width, diameter and caliper clearance still need checking.

Jeep Cherokee 2014–2024 Dodge Nitro 2007–2012

Will wheels from another vehicle fit your Cerbera?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a TVR Cerbera?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Jeep Cherokee 2014–2024 Wheels from Dodge Nitro 2007–2012 Wheels from Chrysler Grand Voyager 2000–2007 Wheels from Jeep Wrangler 1987–2006

Same PCD, different centre bore

These vehicles also use 5x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.6 mm, and will not fit if it is smaller.

TVR Sagaris ⌀70.1 TVR T350 ⌀70.1 TVR Tamora ⌀70.1 TVR Tuscan Speed 6 ⌀70.1 Dacia Bigster ⌀66.1 Renault 4 E-Tech ⌀66.1 Alpine A290 ⌀73.1 Kia EV3 ⌀67.1

Frequently asked questions

What is the PCD of a TVR Cerbera?

A TVR Cerbera (1996–2003) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a TVR Cerbera need a hub centric ring?

The centre bore (hub diameter) of a TVR Cerbera is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a TVR Cerbera?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a TVR Cerbera?

With the same PCD (5x114.3) and the same centre bore (71.6 mm), these include: Jeep Cherokee, Dodge Nitro. Offset, width and rim diameter still need checking for each vehicle.

Other TVR models

Sagaris 5x114.3 T350 5x114.3 Tamora 5x114.3 Tuscan Speed 6 5x114.3 Chimaera 4.6 4x108 Chimaera 4.0-5.0-V8 4x108 Griffith 4x108 All TVR →

Does a value look wrong, or is a version missing? Let us know, we check every report.