Volvo 360 PCD

1983–1991

VERIFIED

Centre bore52.1 mm

Offset (ET)ET40

Fixing typeM12x1.25

Tightening torque110 Nm

Original tyres175/70R13

Hub centric rings 52.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo 360

A Volvo 360 (1983–1991) uses a 4x100 PCD and a centre bore of 52.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 52.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 52.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.25, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 52.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo 360 without rings. Offset, width, diameter and caliper clearance still need checking.

Volvo 440 1987–1997 Volvo 460 1987–1997 Volvo 480 1986–1995 Volvo 340 1976–1991

Will wheels from another vehicle fit your 360?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Volvo 360?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Volvo 340 1976–1991

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 52.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Volvo 360?

A Volvo 360 (1983–1991) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Volvo 360 need a hub centric ring?

The centre bore (hub diameter) of a Volvo 360 is 52.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo 360?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo 360?

The specified tightening torque is 110 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo 360?

With the same PCD (4x100) and the same centre bore (52.1 mm), these include: Volvo 440, Volvo 460, Volvo 480, Volvo 340. Offset, width and rim diameter still need checking for each vehicle.

Other Volvo models

EC40 5x108 EX40 axe arrière 5x108 EX40 axe avant 5x108 EX30 5x108 EX90 axe avant 5x108 EX90 axe arrière 5x108 C40 5x108 XC40 5x108 V90 Cross Country 5x108 V60 Cross Country 5x108 V60 Polestar 5x108 V40 Cross Country 5x108 All Volvo →

Does a value look wrong, or is a version missing? Let us know, we check every report.