FRENES

Volvo S60 III PCD

from 2019
VERIFIED
⌀63.4
PCD5x108
Centre bore63.4 mm
Offset (ET)ET37 to ET45.5
Fixing typeM14x1.5
Tightening torque140 Nm
Original tyres215/60R16, 225/50R17, 235/45R18, 235/40R19
Vis de roue M14
Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo S60 III

A Volvo S60 III (from 2019) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET37 to ET45.5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/60R16, 225/50R17, 235/45R18, 235/40R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Volvo S60

Previous generation: Volvo S60 (2000–2010) — same 5x108 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

S60 2000–2010 · 5x108 S60 III from 2019

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm 7Jx16 ET37 215/60R16
Version 2 5x108 63.4 mm 7Jx17 ET40.5 225/50R17
Version 3 5x108 63.4 mm 8Jx18 ET42 235/45R18
Version 4 5x108 63.4 mm 8Jx19 ET42 235/40R19
Version 5 5x108 63.4 mm 8Jx20 ET45.5 245/35R20

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo S60 III without rings. Offset, width, diameter and caliper clearance still need checking.

Volvo EC40 from 2024 Volvo EX40 axe arrière from 2024 Volvo EX40 axe avant from 2024 Volvo EX30 from 2023 Volvo EX90 axe arrière from 2023 Volvo EX90 axe avant from 2023 Volvo C40 from 2021 Volvo V60 II from 2018 Volvo XC40 from 2017 Volvo XC60 II from 2017 Volvo S90 II from 2016 Volvo V90 Cross Country from 2016 Volvo V90 II from 2016 Volvo V60 Cross Country 2015–2018 Volvo XC90 II from 2015 Volvo V60 Polestar 2014–2018

Will wheels from another vehicle fit your S60 III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volvo S60 III?

A Volvo S60 III (from 2019) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo S60 III need a hub centric ring?

The centre bore (hub diameter) of a Volvo S60 III is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo S60 III?

The recorded original offset is ET37 to ET45.5 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo S60 III?

The specified tightening torque is 140 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo S60 III?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Volvo EC40, Volvo EX40 axe arrière, Volvo EX40 axe avant, Volvo EX30. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.