Volvo XC60 II PCD

from 2017
VERIFIED
⌀63.4
Centre bore63.4 mm
Offset (ET)ET38.5 to ET52.5
Fixing typeM14x1.5
Tightening torque140 Nm
Original tyres235/65R17, 235/60R17, 235/60R18, 235/55R19
Restylage 2021 identique

Fitting wheels on a Volvo XC60 II

A Volvo XC60 II (from 2017) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET38.5 to ET52.5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 235/65R17, 235/60R17, 235/60R18, 235/55R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Volvo XC60

Previous generation: Volvo XC60 (2008–2017) — same 5x108 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

XC60 2008–2017 · 5x108 XC60 II from 2017

All recorded versions (6)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm 7.5Jx17 ET50.5 235/65R17
Version 2 5x108 63.4 mm 7.5Jx17 ET50.5 235/60R17
Version 3 5x108 63.4 mm 7.5Jx18 ET50.5 235/60R18
Version 4 5x108 63.4 mm 7.5Jx19 ET50.5 235/55R19
Version 5 5x108 63.4 mm 8Jx20 ET52.5 255/45R20
Version 6 5x108 63.4 mm 8.5Jx21 ET38.5 255/40R21

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo XC60 II without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your XC60 II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volvo XC60 II?

A Volvo XC60 II (from 2017) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo XC60 II need a hub centric ring?

The centre bore (hub diameter) of a Volvo XC60 II is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo XC60 II?

The recorded original offset is ET38.5 to ET52.5 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo XC60 II?

The specified tightening torque is 140 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo XC60 II?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Volvo EC40, Volvo EX40 axe arrière, Volvo EX40 axe avant, Volvo EX30. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.