FRENES

Volvo S90 II PCD

from 2016
VERIFIED
⌀63.4
PCD5x108
Centre bore63.4 mm
Offset (ET)ET42 to ET47.5
Fixing typeM14x1.5
Tightening torque140 Nm
Original tyres225/55R17, 245/45R18, 255/40R19, 255/35R20
Vis de roue M14, restylage 2020
Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volvo S90 II

A Volvo S90 II (from 2016) uses a 5x108 PCD and a centre bore of 63.4 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 63.4 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 63.4 mm.
  • Offset: the original is ET42 to ET47.5. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/55R17, 245/45R18, 255/40R19, 255/35R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Volvo S90

Previous generation: Volvo S90 (1994–1998) — same 5x108 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

S90 1994–1998 · 5x108 S90 II from 2016

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 63.4 mm 8Jx17 ET42 225/55R17
Version 2 5x108 63.4 mm 8Jx18 ET42 245/45R18
Version 3 5x108 63.4 mm 8.5Jx19 ET47 255/40R19
Version 4 5x108 63.4 mm 8.5Jx20 ET47.5 255/35R20
Version 5 5x108 63.4 mm 8.5Jx21 ET44.5 245/35R21

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 63.4 mm centre bore: wheels from these vehicles bolt on and centre on a Volvo S90 II without rings. Offset, width, diameter and caliper clearance still need checking.

Volvo EC40 from 2024 Volvo EX40 axe arrière from 2024 Volvo EX40 axe avant from 2024 Volvo EX30 from 2023 Volvo EX90 axe arrière from 2023 Volvo EX90 axe avant from 2023 Volvo C40 from 2021 Volvo S60 III from 2019 Volvo V60 II from 2018 Volvo XC40 from 2017 Volvo XC60 II from 2017 Volvo V90 Cross Country from 2016 Volvo V90 II from 2016 Volvo V60 Cross Country 2015–2018 Volvo XC90 II from 2015 Volvo V60 Polestar 2014–2018

Will wheels from another vehicle fit your S90 II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volvo S90 II?

A Volvo S90 II (from 2016) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Volvo S90 II need a hub centric ring?

The centre bore (hub diameter) of a Volvo S90 II is 63.4 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volvo S90 II?

The recorded original offset is ET42 to ET47.5 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volvo S90 II?

The specified tightening torque is 140 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volvo S90 II?

With the same PCD (5x108) and the same centre bore (63.4 mm), these include: Volvo EC40, Volvo EX40 axe arrière, Volvo EX40 axe avant, Volvo EX30. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.