FRENES

Abarth 500 PCD

2008–2015
VERIFIED
⌀58.1
PCD4x98
Centre bore58.1 mm
Offset (ET)ET35
Fixing typeM12x1.25
Original tyres195/45R16
Type 312, 1.4 T-Jet 135-160 ch ; la 205/40R17 (7Jx17 ET38) est une option. Koleso la liste comme Fiat 500 1.4T 158 ch.
Wheel spacers 4x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Abarth 500

A Abarth 500 (2008–2015) uses a 4x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x98 required. See all vehicles with 4x98.
  • Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
  • Offset: the original is ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/45R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Abarth 500 without rings. Offset, width, diameter and caliper clearance still need checking.

Abarth 500e from 2023 Abarth 595 2016–2022 Fiat 500e II from 2020 RAM RAM 700 Pickup from 2014 Fiat 500e 2013–2019 Fiat Panda III from 2012 Fiat Qubo from 2010 Alfa Romeo Mito 2008–2019 Alfa Romeo Mito 1.4 Sport 2008–2019 Alfa Romeo Mito 1.6 JTDm Sport 2008–2019 Citroen Nemo from 2008 Lancia Delta III 2008–2014 Peugeot Bipper from 2008 Fiat 500 (312) from 2007 Fiat Linea 2007–2016 Lada Priora 2007–2018

Will wheels from another vehicle fit your 500?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Abarth 500?

A Abarth 500 (2008–2015) has a PCD of 4x98: 4 studs or bolts spaced around a circle 98 mm in diameter.

Does a Abarth 500 need a hub centric ring?

The centre bore (hub diameter) of a Abarth 500 is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Abarth 500?

The recorded original offset is ET35. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Abarth 500?

With the same PCD (4x98) and the same centre bore (58.1 mm), these include: Abarth 500e, Abarth 595, Fiat 500e II, RAM RAM 700 Pickup. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.