FRENES

Alfa Romeo GTV V6 PCD

1983–1987
VERIFIED
⌀58.1
PCD5x98
Centre bore58.1 mm
Offset (ET)ET35
Fixing typeM12x1.25
Tightening torque83-103 Nm
Original tyres205/50R16
Hub centric rings 58.1 mm → Wheel spacers 5x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Alfa Romeo GTV V6

A Alfa Romeo GTV V6 (1983–1987) uses a 5x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x98 required. See all vehicles with 5x98.
  • Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
  • Offset: the original is ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 83-103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/50R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Alfa Romeo GTV V6 without rings. Offset, width, diameter and caliper clearance still need checking.

Alfa Romeo 4C 2013–2020 Alfa Romeo GT 2003–2010 Alfa Romeo 147 2001–2010 Alfa Romeo 156 1997–2006 Alfa Romeo GTV 1995–2006 Alfa Romeo Spider V6 1995–2006 Alfa Romeo 164 3.0 V6 1993–1998 Alfa Romeo 164 Q4 4x4 1993–1998 Fiat e-Doblo from 2022 Fiat 500L Trekking from 2013 RAM Promaster City from 2013 Fiat 500L from 2012 Holden Combo from 2011 Fiat Doblo Maxi 2010–2022 Lancia Phedra 2002–2010 Peugeot 807 from 2002

Will wheels from another vehicle fit your GTV V6?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Alfa Romeo 75 5 trou, V6 ⌀58.6 Citroen C8 ⌀65.1

Frequently asked questions

What is the PCD of a Alfa Romeo GTV V6?

A Alfa Romeo GTV V6 (1983–1987) has a PCD of 5x98: 5 studs or bolts spaced around a circle 98 mm in diameter.

Does a Alfa Romeo GTV V6 need a hub centric ring?

The centre bore (hub diameter) of a Alfa Romeo GTV V6 is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Alfa Romeo GTV V6?

The recorded original offset is ET35. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Alfa Romeo GTV V6?

The specified tightening torque is 83-103 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Alfa Romeo GTV V6?

With the same PCD (5x98) and the same centre bore (58.1 mm), these include: Alfa Romeo 4C, Alfa Romeo GT, Alfa Romeo 147, Alfa Romeo 156. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.