Chevrolet Corvette C6 PCD

2004–2013

VERIFIED

Centre bore70.3 mm

Offset (ET)ET56

Fixing typeEcrous - 12x1.50

Tightening torque140 Nm

Hub centric rings 70.3 mm → Wheel spacers 5x120.65(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Corvette C6

A Chevrolet Corvette C6 (2004–2013) uses a 5x120.65 PCD and a centre bore of 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120.65 required. See all vehicles with 5x120.65.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Offset: the original is ET56. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120.65 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet Corvette C6 without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Corvette C7 2013–2019 Chevrolet Jimny from 1998 Chevrolet Corvette C5 1997–2004 Chevrolet Blazer 2WD 1986–2004 Chevrolet Blazer 4WD 1986–2004 Chevrolet Corvette C4 1984–1996 Chevrolet S10 1982–1993 Chevrolet Caprice 1971–1977 Chevrolet Camaro 1969–1982 Chevrolet Monte Carlo 1969–1981 Chevrolet Corvette C3 1968–1982 Chevrolet Chevelle 1964–1977 Chevrolet Malibu 1964–1983 Chevrolet Nova 1964–1981 Chevrolet El Camino 1959–1987 Chevrolet Impala 1957–1971

Will wheels from another vehicle fit your Corvette C6?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120.65 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.

Cadillac CTS-V ⌀67.1 Cadillac CTS ⌀67.1 Jaguar XK ⌀73.8 Aston Martin DB7 ⌀74.1 Aston Martin Virage ⌀73.9 Aston Martin Lagonda ⌀73.9 Jaguar XJ ⌀74

Frequently asked questions

What is the PCD of a Chevrolet Corvette C6?

A Chevrolet Corvette C6 (2004–2013) has a PCD of 5x120.65: 5 studs or bolts spaced around a circle 120.65 mm in diameter.

Does a Chevrolet Corvette C6 need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Corvette C6 is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chevrolet Corvette C6?

The recorded original offset is ET56. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chevrolet Corvette C6?

The specified tightening torque is 140 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet Corvette C6?

With the same PCD (5x120.65) and the same centre bore (70.3 mm), these include: Chevrolet Corvette C7, Chevrolet Jimny, Chevrolet Corvette C5, Chevrolet Blazer 2WD. Offset, width and rim diameter still need checking for each vehicle.

Other Chevrolet models

Corvette C8 5x120 Bolt EV 5x105 Spark M400 4x100 Corvette C7 5x120.65 Trax 5x105 Volt 5x115 Orlando 5x115 Aveo 4 trou 4x100 Aveo 5 trou 5x105 Silverado 2500 8x180 Spark M300 4x100 Cruze Diesel 5x115 All Chevrolet →

Does a value look wrong, or is a version missing? Let us know, we check every report.