FRENES

Cadillac CTS PCD

2002–2007
VERIFIED
⌀70.3
PCD5x115 or 5x120.65
Centre bore70.3 or 67.1 mm
Offset (ET)ET40 to ET48
Fixing typeEcrous - 12x1.50
Tightening torque140 Nm
⚠ This model comes with 5x115 or 5x120.65 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 70.3 mm → Wheel spacers 5x115(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Cadillac CTS

A Cadillac CTS (2002–2007) uses a 5x115 or 5x120.65 PCD and a centre bore of 70.3 or 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x115 or 5x120.65 required. See all vehicles with 5x115.
  • Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
  • Offset: the original is ET40 to ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x115 70.3 mm — ET40 —
Version 2 5x120.65 67.1 mm — ET48 —

Vehicles with the same PCD and centre bore

Same 5x115 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Cadillac CTS without rings. Offset, width, diameter and caliper clearance still need checking.

Cadillac ATS 2013–2019 Cadillac Deville 1994–1999 Cadillac Allante 1987–1993 Cadillac Seville 1975–1979 Opel Cascada 2013–2019 Chevrolet Volt from 2012 Holden Cruze Wagon Diesel from 2012 Holden Volt from 2012 Opel Ampera from 2012 Chevrolet Orlando 2011–2014 Opel Zafira Tourer 2011–2018 GMC Terrain 2010–2018 Chevrolet Cruze Diesel from 2009 Holden Cruze Diesel from 2009 Opel Astra J 1.6T, 1.7D, 2.0D 2009–2015 Saturn Vue 2007–2010

Will wheels from another vehicle fit your CTS?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Cadillac CTS?

A Cadillac CTS (2002–2007) can have a 5x115 or 5x120.65 PCD depending on the version: check on an original wheel.

Does a Cadillac CTS need a hub centric ring?

The centre bore (hub diameter) of a Cadillac CTS is 70.3 or 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Cadillac CTS?

The recorded original offset is ET40 to ET48 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Cadillac CTS?

The specified tightening torque is 140 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Cadillac CTS?

With the same PCD (5x115) and the same centre bore (70.3 mm), these include: Cadillac ATS, Cadillac Deville, Cadillac Allante, Cadillac Seville. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.