Chery Amulet PCD

from 2006

VERIFIED

Centre bore57.1 mm

Offset (ET)ET38

Fixing type-

Hub centric rings 57.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chery Amulet

A Chery Amulet (from 2006) uses a 4x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Chery Amulet without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen XL1 from 2015 Volkswagen Cross Up 2013–2023 Volkswagen e-Up 2013–2023 Seat Mii 2012–2021 Skoda Citigo 2012–2020 Volkswagen Up 2011–2023 Volkswagen Lupo GTI 2002–2005 Audi A2 1.2 TDI 2000–2006 Volkswagen Lupo 1998–2005 Seat Arosa 1997–2005 Skoda Felicia Pickup 1996–2001 Seat Inca 1995–2003 Skoda Felicia 1994–2001 Seat Cordoba 1993–2002 Seat Ibiza 1993–2002 Volkswagen Vento 1992–1998

Will wheels from another vehicle fit your Amulet?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Chery Amulet?

A Chery Amulet (from 2006) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Chery Amulet need a hub centric ring?

The centre bore (hub diameter) of a Chery Amulet is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chery Amulet?

The recorded original offset is ET38. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Chery Amulet?

With the same PCD (4x100) and the same centre bore (57.1 mm), these include: Volkswagen XL1, Volkswagen Cross Up, Volkswagen e-Up, Seat Mii. Offset, width and rim diameter still need checking for each vehicle.

Other Chery models

Fora 4x114.3 Tiggo 5x114.3 All Chery →

Does a value look wrong, or is a version missing? Let us know, we check every report.