Skoda Felicia PCD

1994–2001

VERIFIED

Centre bore57.1 mm

Offset (ET)ET38

Fixing typeM12x1.50

Tightening torque110 Nm

Original tyres165/70R13

Hub centric rings 57.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Skoda Felicia

A Skoda Felicia (1994–2001) uses a 4x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 165/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Skoda Felicia without rings. Offset, width, diameter and caliper clearance still need checking.

Skoda Citigo 2012–2020 Skoda Felicia Pickup 1996–2001 Volkswagen XL1 from 2015 Volkswagen Cross Up 2013–2023 Volkswagen e-Up 2013–2023 Seat Mii 2012–2021 Volkswagen Up 2011–2023 Chery Amulet from 2006 Volkswagen Lupo GTI 2002–2005 Audi A2 1.2 TDI 2000–2006 Volkswagen Lupo 1998–2005 Seat Arosa 1997–2005 Seat Inca 1995–2003 Seat Cordoba 1993–2002 Seat Ibiza 1993–2002 Volkswagen Vento 1992–1998

Will wheels from another vehicle fit your Felicia?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Skoda Felicia?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Skoda Felicia Pickup 1996–2001 Wheels from Volkswagen Lupo 1998–2005 Wheels from Seat Arosa 1997–2005 Wheels from Seat Cordoba 1993–2002

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Skoda Felicia?

A Skoda Felicia (1994–2001) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Skoda Felicia need a hub centric ring?

The centre bore (hub diameter) of a Skoda Felicia is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Skoda Felicia?

The recorded original offset is ET38. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Skoda Felicia?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Skoda Felicia?

With the same PCD (4x100) and the same centre bore (57.1 mm), these include: Skoda Citigo, Skoda Felicia Pickup, Volkswagen XL1, Volkswagen Cross Up. Offset, width and rim diameter still need checking for each vehicle.

Other Skoda models

Elroq 5x112 Fabia IV 5x100 Enyaq 5x112 Octavia IV 5x112 Kamiq GT 5x100 Scala 5x100 Kodiaq GT 5x112 Kamiq 5x100 Kodiaq 5x112 Karoq 5x112 Fabia 14 inch 5x100 Fabia 15 inch 5x100 All Skoda →

Does a value look wrong, or is a version missing? Let us know, we check every report.