Audi A2 1.2 TDI PCD

2000–2006

VERIFIED

Centre bore57.1 mm

Offset (ET)ET45

Fixing typeM12x1.50

Tightening torque110 Nm

Original tyres145/80R14

Hub centric rings 57.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi A2 1.2 TDI

A Audi A2 1.2 TDI (2000–2006) uses a 4x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 145/80R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Audi A2 1.2 TDI without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen XL1 from 2015 Volkswagen Cross Up 2013–2023 Volkswagen e-Up 2013–2023 Seat Mii 2012–2021 Skoda Citigo 2012–2020 Volkswagen Up 2011–2023 Chery Amulet from 2006 Volkswagen Lupo GTI 2002–2005 Volkswagen Lupo 1998–2005 Seat Arosa 1997–2005 Skoda Felicia Pickup 1996–2001 Seat Inca 1995–2003 Skoda Felicia 1994–2001 Seat Cordoba 1993–2002 Seat Ibiza 1993–2002 Volkswagen Vento 1992–1998

Will wheels from another vehicle fit your A2 1.2 TDI?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Audi A2 1.2 TDI?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Volkswagen Cross Up 2013–2023 Wheels from Volkswagen e-Up 2013–2023 Wheels from Seat Mii 2012–2021 Wheels from Skoda Citigo 2012–2020

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Audi A2 1.2 TDI?

A Audi A2 1.2 TDI (2000–2006) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Audi A2 1.2 TDI need a hub centric ring?

The centre bore (hub diameter) of a Audi A2 1.2 TDI is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi A2 1.2 TDI?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi A2 1.2 TDI?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi A2 1.2 TDI?

With the same PCD (4x100) and the same centre bore (57.1 mm), these include: Volkswagen XL1, Volkswagen Cross Up, Volkswagen e-Up, Seat Mii. Offset, width and rim diameter still need checking for each vehicle.

Other Audi models

Q4 E-TRON 5x112 A3 8Y 5x112 RS Q8 5x112 RS6 C8 5x112 A1 Citycarver 5x100 SQ8 5x112 RS Q3 5x112 A4 5x112 S6 C8 5x112 SQ2 5x112 A6 C8 5x112 E-Tron 5x112 All Audi →

Does a value look wrong, or is a version missing? Let us know, we check every report.