Seat Arosa PCD

1997–2005

VERIFIED

Centre bore57.1 mm

Offset (ET)ET45

Fixing typeM12x1.50

Original tyres155/70R13

Hub centric rings 57.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Seat Arosa

A Seat Arosa (1997–2005) uses a 4x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 155/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Seat Arosa without rings. Offset, width, diameter and caliper clearance still need checking.

Seat Mii 2012–2021 Seat Inca 1995–2003 Seat Cordoba 1993–2002 Seat Ibiza 1993–2002 Seat Toledo 1991–1998 Volkswagen XL1 from 2015 Volkswagen Cross Up 2013–2023 Volkswagen e-Up 2013–2023 Skoda Citigo 2012–2020 Volkswagen Up 2011–2023 Chery Amulet from 2006 Volkswagen Lupo GTI 2002–2005 Audi A2 1.2 TDI 2000–2006 Volkswagen Lupo 1998–2005 Skoda Felicia Pickup 1996–2001 Skoda Felicia 1994–2001

Will wheels from another vehicle fit your Arosa?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Seat Arosa?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Seat Cordoba 1993–2002 Wheels from Seat Toledo 1991–1998 Wheels from Volkswagen Lupo 1998–2005 Wheels from Skoda Felicia Pickup 1996–2001

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Nissan Dayz ⌀56.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1

Frequently asked questions

What is the PCD of a Seat Arosa?

A Seat Arosa (1997–2005) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Seat Arosa need a hub centric ring?

The centre bore (hub diameter) of a Seat Arosa is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Seat Arosa?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Seat Arosa?

With the same PCD (4x100) and the same centre bore (57.1 mm), these include: Seat Mii, Seat Inca, Seat Cordoba, Seat Ibiza. Offset, width and rim diameter still need checking for each vehicle.

Other Seat models

Leon IV 5x112 Leon Cupra Sportstourer 5x112 Tarraco 5x112 Arona 5x100 Ibiza V 5x100 Ateca 5x112 Leon Cupra ST 5x112 Leon Cupra 5x112 Mii 4x100 Leon III 5x112 Ibiza ST 5x100 Exeo 5x112 All Seat →

Does a value look wrong, or is a version missing? Let us know, we check every report.