FRENES

Chevrolet Equinox PCD

2004–2009
VERIFIED
⌀70.3
PCD5x115 or 5x120
Centre bore70.3 or 66.8 mm
Offset (ET)ET41 to ET46
Fixing typeEcrous - 12x1.50
Tightening torque120 Nm
⚠ This model comes with 5x115 or 5x120 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 70.3 mm → Wheel spacers 5x115(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Equinox

A Chevrolet Equinox (2004–2009) uses a 5x115 or 5x120 PCD and a centre bore of 70.3 or 66.8 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x115 or 5x120 required. See all vehicles with 5x115.
  • Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
  • Offset: the original is ET41 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x115 70.3 mm — ET41 —
Version 2 5x120 66.8 mm — ET46 —

Vehicles with the same PCD and centre bore

Same 5x115 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet Equinox without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Volt from 2012 Chevrolet Orlando 2011–2014 Chevrolet Cruze Diesel from 2009 Chevrolet Captiva from 2006 Chevrolet Transport 4WD 2002–2005 Chevrolet Alero 1998–2001 Chevrolet Transport 1997–2005 Chevrolet Lumina 1990–1999 Chevrolet Celebrity 1982–1990 Chevrolet Monte Carlo 1969–1981 Chevrolet Malibu 1964–1983 Chevrolet Impala 1957–1971 Cadillac ATS 2013–2019 Opel Cascada 2013–2019 Holden Cruze Wagon Diesel from 2012 Holden Volt from 2012

Will wheels from another vehicle fit your Equinox?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Chevrolet Equinox?

A Chevrolet Equinox (2004–2009) can have a 5x115 or 5x120 PCD depending on the version: check on an original wheel.

Does a Chevrolet Equinox need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Equinox is 70.3 or 66.8 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chevrolet Equinox?

The recorded original offset is ET41 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chevrolet Equinox?

The specified tightening torque is 120 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet Equinox?

With the same PCD (5x115) and the same centre bore (70.3 mm), these include: Chevrolet Volt, Chevrolet Orlando, Chevrolet Cruze Diesel, Chevrolet Captiva. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.