A Dodge Magnum 4x4 (2004–2008) uses a 5x115 PCD and a centre bore of 71.6 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
Offset: the original is ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 150 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Vehicles with the same PCD and centre bore
Same 5x115 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Dodge Magnum 4x4 without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your Magnum 4x4?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 5x115 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.6 mm, and will not fit if it is smaller.
A Dodge Magnum 4x4 (2004–2008) has a PCD of 5x115: 5 studs or bolts spaced around a circle 115 mm in diameter.
Does a Dodge Magnum 4x4 need a hub centric ring?
The centre bore (hub diameter) of a Dodge Magnum 4x4 is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Dodge Magnum 4x4?
The recorded original offset is ET55. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Dodge Magnum 4x4?
The specified tightening torque is 150 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Dodge Magnum 4x4?
With the same PCD (5x115) and the same centre bore (71.6 mm), these include: Dodge Challenger, Dodge Charger, Dodge Magnum, Chrysler 300C. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more