Chrysler 300C PCD

2004–2022

VERIFIED

Centre bore71.6 mm

Offset (ET)ET30

Fixing typeEcrous - 14x1.50

Tightening torque150 Nm

Original tyres225/60R18

Hub centric rings 71.6 mm → Wheel spacers 5x115(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chrysler 300C

A Chrysler 300C (2004–2022) uses a 5x115 PCD and a centre bore of 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x115 required. See all vehicles with 5x115.
Centre bore: the wheel must have a centre bore of 71.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 71.6 mm.
Offset: the original is ET30. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 14x1.50, tightened to 150 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 225/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x115 PCD and same 71.6 mm centre bore: wheels from these vehicles bolt on and centre on a Chrysler 300C without rings. Offset, width, diameter and caliper clearance still need checking.

Chrysler 300C 4x4 from 2004 Dodge Challenger 2008–2023 Dodge Charger 2006–2023 Dodge Magnum 2004–2008 Dodge Magnum 4x4 2004–2008

Will wheels from another vehicle fit your 300C?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Chrysler 300C?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Dodge Challenger 2008–2023 Wheels from Dodge Charger 2006–2023

Same PCD, different centre bore

These vehicles also use 5x115 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 71.6 mm, and will not fit if it is smaller.

Cadillac ATS ⌀70.3 Opel Cascada ⌀70.3 Chevrolet Volt ⌀70.3 Holden Cruze Wagon Diesel ⌀70.3 Holden Volt ⌀70.3 Opel Ampera ⌀70.3 Chevrolet Orlando ⌀70.3 Opel Zafira Tourer ⌀70.3

Frequently asked questions

What is the PCD of a Chrysler 300C?

A Chrysler 300C (2004–2022) has a PCD of 5x115: 5 studs or bolts spaced around a circle 115 mm in diameter.

Does a Chrysler 300C need a hub centric ring?

The centre bore (hub diameter) of a Chrysler 300C is 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chrysler 300C?

The recorded original offset is ET30. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chrysler 300C?

The specified tightening torque is 150 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chrysler 300C?

With the same PCD (5x115) and the same centre bore (71.6 mm), these include: Chrysler 300C 4x4, Dodge Challenger, Dodge Charger, Dodge Magnum. Offset, width and rim diameter still need checking for each vehicle.

Other Chrysler models

Aspen 5x139.7 300C 4x4 5x115 Pacifica 5x127 Crossfire 5x112 Town and Country 5x114.3 Grand Voyager 5x114.3 PT Cruiser 5x100 300M 5x114.3 Prowler 5x114.3 Sebring 5x100 Stratus 5x100 Neon 5x100 All Chrysler →

Does a value look wrong, or is a version missing? Let us know, we check every report.