A Daihatsu Cuore (1990–1998) uses a 4x110 or 4x100 PCD and a centre bore of 56.1 or 54.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET40 to ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 105 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 155/65R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
All recorded versions (2)
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
4x110
56.1 mm
—
ET50
—
Version 2
4x100
54.1 mm
—
ET40
155/65R13
Vehicles with the same PCD and centre bore
Same 4x110 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Daihatsu Cuore without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 4x110 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.
A Daihatsu Cuore (1990–1998) can have a 4x110 or 4x100 PCD depending on the version: check on an original wheel.
Does a Daihatsu Cuore need a hub centric ring?
The centre bore (hub diameter) of a Daihatsu Cuore is 56.1 or 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Daihatsu Cuore?
The recorded original offset is ET40 to ET50 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Daihatsu Cuore?
The specified tightening torque is 105 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Daihatsu Cuore?
With the same PCD (4x110) and the same centre bore (56.1 mm), these include: Daihatsu Move L601, Daihatsu Midget II. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more