A Daihatsu Move L601 (1997–1999) uses a 4x110 PCD and a centre bore of 56.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET50. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Vehicles with the same PCD and centre bore
Same 4x110 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Daihatsu Move L601 without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your Move L601?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 4x110 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.
A Daihatsu Move L601 (1997–1999) has a PCD of 4x110: 4 studs or bolts spaced around a circle 110 mm in diameter.
Does a Daihatsu Move L601 need a hub centric ring?
The centre bore (hub diameter) of a Daihatsu Move L601 is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Daihatsu Move L601?
The recorded original offset is ET50. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Daihatsu Move L601?
The specified tightening torque is 103 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Daihatsu Move L601?
With the same PCD (4x110) and the same centre bore (56.1 mm), these include: Daihatsu Midget II, Daihatsu Cuore. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more