Daihatsu Move L901 PCD

1999–2003

VERIFIED

Centre bore56.1 mm

Offset (ET)ET45

Fixing type-

Tightening torque103 Nm

Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Daihatsu Move L901

A Daihatsu Move L901 (1999–2003) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Daihatsu Move L901 without rings. Offset, width, diameter and caliper clearance still need checking.

Daihatsu Gran Move 1997–2002 Daihatsu Applause 1989–2001 Nissan Dayz from 2023 Honda WR-V from 2017 MG MG3 from 2017 Mini Coupe 2011–2015 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Peugeot iON from 2009 Honda Fit from 2008 Mini Cooper Clubman from 2007 Mini Cooper Clubman S from 2007 Proton Persona 2007–2010 Rover CityRover 2004–2006 Rover Streetwise 2004–2006

Will wheels from another vehicle fit your Move L901?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.

Daihatsu Materia ⌀54.1 Daihatsu Mira Gino ⌀54.1 Daihatsu Trevis ⌀54.1 Daihatsu Copen ⌀54.1 Daihatsu YRV ⌀54.1 Daihatsu Sirion ⌀54.1 Daihatsu Cuore ⌀54.1 Daihatsu Charade ⌀54.1

Frequently asked questions

What is the PCD of a Daihatsu Move L901?

A Daihatsu Move L901 (1999–2003) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Daihatsu Move L901 need a hub centric ring?

The centre bore (hub diameter) of a Daihatsu Move L901 is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Daihatsu Move L901?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Daihatsu Move L901?

The specified tightening torque is 103 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Daihatsu Move L901?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Daihatsu Gran Move, Daihatsu Applause, Nissan Dayz, Honda WR-V. Offset, width and rim diameter still need checking for each vehicle.

Other Daihatsu models

Trevis 4x100 Materia 4x100 Mira Gino 4x100 Copen 4x100 YRV 4x100 Sirion 4x100 Gran Move 4x100 Move L601 4x110 Terios 5x114.3 Midget II 4x110 Cuore 4x100 Applause 4x100 All Daihatsu →

Does a value look wrong, or is a version missing? Let us know, we check every report.